Adjustable mobile cargo hopper. Its capacity can be easily increased by adding side extensions.
With load capacities of 14 m3, 17.5 m3, 21 m3 and 24.5 m3 and a flow rate of 0.5 to 15 t/h.
Walnuts need to be washed to remove branches, soil, leaves and loose bark. This machine is equipped with drawn steel bars, which guarantees efficient washing and good performance. There are several models according to the desired capacity.
It should be noted that this machine can also be used for hazelnuts, etc...
Placed directly after a harvest or after a prewash (or cleaning) station, this nut floating tank will easily separate nuts from stones to minimize the impact of possible dirt, rocks, clods, and mud, on the rest of the line. This multifunctional device is also used to separate chestnuts.
As the water level is constant, you will work under the same conditions from the start to the end of your working period.
This washer is the fastest and most versatile.
It is intended to remove the green peel from the nuts (shell) and wash them very quickly.
Equipped with an internal motorized drum rotating in the opposite direction of the outer drum, it can, thanks to the variation in speed and the nature of the coating, act with greater or lower speed continuously.
Its robust structure and components allow intensive use.
The capacity is carried out by varying the filling rate and the rotation speed.
Adaptation to different layouts: extension, continuous configuration of two machines
Efficient waste sorting: thanks to baffles and transverse and recovery belt options
Speed: elimination of waste and spoiled nuts
Less labor: classification requires less staff
This grading mat is intended for manual grading.
It is used to separate the good nuts from the bad ones, as well as to separate the shells after splitting.
The table height and speed are adjustable to provide maximum work comfort.
Once washed, the nuts must be dried before being stored. Thanks to their extraordinary capacity, in no more than 48 hours, the nuts will have released most of the moisture they contain and will be ready to be sold.
Our dryer is necessarily adapted to your drying needs, as the capacity can be easily increased by adding modules.
With capacities from 3 m3 to 25 m3/each dryer.
Used to separate empty shells, as well as to separate grains/fruits from peels. It can be used on nuts (dried or fresh), hazelnuts (dried or fresh) and chestnuts.
It must be placed after the adjustable vibratory feed and before a calibration unit.
It processes up to 1500 kg of nuts/hour.
Continuous rotary calibrator to separate 1, 2 or 3 calibers.
Very robust, reliable and high-performance, this nut peeler will provide a high percentage of halves depending on the nut variety. Capacity up to 100kg/h.
This equipment allows you to separate the nuts from the shells. It processes between 40 and 120 kg of walnuts per hour.
The vibrating calibrator separates all products by size difference.
.webp)
.png)
.png)
.png)
.png)
.png)